manualshive.com logo in svg

Roche Accutrend GC, Руководство пользователя

Поделиться
Скачать
Roche Accutrend GC Скачать руководство пользователя страница 17

3.

28

29

3.2

Measuring glucose and cholesterol

3.2.1 Practising measurement

If you have little or no experience of self-monitoring and want
to get used to using the meter and the test strips you can prac-
tise measuring without a blood sample. The procedure is iden-
tical to that for checking the performance of the meter; go to
Chapter 5.1 “Checking the Measurement System” and follow
the instructions given there.

3.2.2 Performing a measurement

To perform a measurement you require:

●

The Accutrend

®

GC meter which you have already coded;

you have also set the time, date and beeper.

●

Accutrend

®

test strips (Accutrend

®

Glucose for blood glu-

cose measurement; Accutrend

®

Cholesterol for determina-

tion of cholesterol).

●

A lancing device (e.g. Accu-Chek

®

Softclix

®

Pro with 

Accu-Chek

®

Softclix

®

Pro Lancet).

●

Possibly alcohol wipes and cellulose pads.

Procedure

Carefully read the pack inserts that come with the test
strips and the lancing device.

Warning!

If measurements are performed on several

persons there is a potential risk of infection (e.g. hepati-
tis, AIDS). Before using the meter for another person it

▲

▼

MEM

ON/OFF

2

®

CHOL

CHOL

GL

U

GL

U

011553 AccuGC GB  19.02.2002  10:40 Uhr  Seite 28

Содержание Accutrend GC



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды