ROC LL1GBQ24-B26CG, Руководство по использованию, установке и обслуживанию

Страница: 6 / 56

6
T his boiler is only for indoor installation, domestic heating and domestic hot water
supply.In addition to this, other installatio n and usage do not meet the requirement.
The normal usage requirem ent for boiler is: po wer supply is 230V
~
/50Hz, Power
supply capacity is more than10A, there must be a really grounded socket.
Natural gas users require the pre-furnace dynamic pressure is 17 m ba r - 2 5 m
b a r; and tap water supply pressure is 1.2-2.0 bar.If failure to meet the above
requirements, it may result in that the boiler can not work normally.
The boiler installation,adjustment and maintenance must be carried out by the
qualified personnel in accordance with local gas safety (installation and
use) ,The technicians who undertake adjustment and maintenance must be
authorized by the manufac turer.
If the boiler is installed in a small compartment, please do not block the
dedicated vents and do not use this compartment as storage room.
If you smell a gas smell or suspect a gas leakage, please operate it as these below
steps:
Turn off the boiler;
Do not turn on or turn off any power switch in a hazardous area;
Do not smoke or turn on any equipment that creates sparks in hazardous areas;
Turn off the gas supply valve on the gas pipework;
Ventilate the room;
Contact with your boiler supplier or after-sales service.
2. Safety regulation
2.1 Usage condition
2.2 Installation and adjustment
2.3 When the gas smell is found