ROC LL1GBQ24-B26CG, Руководство по использованию, установке и обслуживанию

Страница: 26 / 56

Warning:
The boiler can only be used for domestic hot water and indoor heating!
The boiler was designed for indoors installation according to the current laws and
regulations ,so it cannot be installed and used outdoors. If the boiler is installed in
outdoor environment, it will cause bad operation and even damage of boiler.
The boiler should only be installed on closed ,flat, and vertical load-bearing
wall ,and obey the minimum distance required for installation and maintenance.
Above minimum distance is indicated in this i nstruction.
Note:
Before using boiler first time, the water tank should be filled with
water. Therefore, before fixing the flue system, 1/4 liter of water should be
poured into the water tank through flue outlet, or open the cover at the bottom
fixed position for boiler, then pour into wa ter and close the cover.
Warning:
Insuffi cient water in the tank can cause smoke to discharge into
surrounding air in a short time.
At the same time, before supplying heating/domestic hot water to the users, the
boiler should be connected to a heating supplying network, heat radiation
device and/ or domestic hot water supplying network which match the function
and capacity of the gas boiler. Before connecting the gas boiler to the system,
please ask the insta ller/engineer to make the following operation:
a)All of heating system pipeline must be completely washed, Any residues or
dirty object in the pipe will affect the boiler’s operation.
b)Check if the current gas type is suitable for the gas boiler. Check if the
instructions in the package and technical data for the applicable gas type in the
data plate are consistent with the current gas type.
c)Check if the ventilation of flu e is g ood, and if there are any blockages. The
boiler cannot be connected to a public chimney. The gas boiler and the flue pipe
connector can only be installed after all the ab ove steps are carried out.
26
5. Boiler adjustment