Robur Roburbox100, Инструкция по установке и эксплуатации

Страница: 32 / 84

RB100 : Installation and Use Manual
26 Ed. 06/2014 – FW version 1.002
Figure 9
RB100. Example of connection to network: 24 Vac 10VA power supply
2.3 ELECTRIC CONNECTIONS FOR REQUEST SERVICES
Inputs
The electric installer must properly connect input of each service used, depending on its
configuration, i.e.:
¾ analogue Input;
¾
digital Input.
In particular, it is necessary to underline again that each one of the 4 services can
be configured both as analogue and as digital; therefore, only one scheme for each
one of the two types of connection, which can be applied to each service
independently, will be represented here below.
Do not forget that jumpers on input terminal sides of service involved must be
properly located and service is to be properly configured (SECTION 5).
R O B U R B O X
R B 1 0 0
2 4 V ~ (± 2 0 % ) 1 0 V A
5 0 /6 0 H z
1 ,2 ,3 ,4 ,5 ,6 : 2 5 0 V ~ 4 (3 )A
IP 2 0