Robur Roburbox100, Инструкция по установке и эксплуатации

Страница: 52 / 84

RB100 : Installation and Use Manual
46 Ed. 06/2014 – FW version 1.002
3.1 COMMISSIONING PROCEDURE
The whole procedure for appliance commissioning is to be performed by a Robur
Authorised Technical Assistance Centres only (TAC) following manufacturer’s
instructions. Warranty could be void if procedure is not performed by TAC.
Appliance proper operation and duration depend on its proper usage:
•
proper installation;
•
proper use.
When released from factory, the appliance is reliable and tested.
To properly perform the whole commissioning procedure on appliance, act in the following
order:
- preliminary checks on plant conformity;
- adjustment of RB100 and DDC operating parameters;
- adjustment of plant operating parameters depending on user’s needs.
Preliminary checks on plant conformity
Robur TAC must:
¾ check that the whole plant has been implemented as designed, following
manufacturer’s instructions and under standards enforced
(Project must be drawn by a certified professional);
¾ personally check that (hydraulic/gas and electric) Robur external units on the
plant have been properly performed:
¾ personally check that (electric) connection of RB100 and DDC interfaces (as well
as their connections to external units) have been properly performed;
¾
check that plant compliance condition really exist (as stated by authorized firm in
charge of installation to the user).
The Declaration of Conformity CERTIFIES that the plant complies with standards
enforced.
It is a
compulsory
document, thus, authorized firm in charge of appliance
installation must issue it to the owner, under the Law.
If all the above-listed conditions apply, the TAC can operate the appliance
“commissioning”.