20
figure 4�1 – On-board controller
S61 + Mod10
LeGend
A
4 digit display
B
Knob
C
CAN port
D
Mod10 controller
description of menu of s61 controller
The parameters and settings of the appliance are grouped in the menus shown on the
controller’s display:
table 4�1 – Menu of electronic board
MenU
MenU desCRIPtIon
tHe dIsPLAY sHoWs
Menu 0
VIEW DATA (TEMPERATURE, VOLTAGE, PUMP SPEED, ECC...)
0.
Menu 1
VIEW ALL PARAMETERS
1.
Menu 2
ENTER ACTIONS
2.
Menu 3
USER SETTINGS (THERMOSTATING, SET-POINT, T. DIFFERENTIAL)
3.
Menu 4
INSTALLATION TECHNICIAN SETTINGS
4.
Menu 5
TECHNICAL ASSISTANCE CENTRE SETTINGS
5.
Menu 6
TECHNICAL ASSISTANCE CENTRE SETTINGS (MACHINE TYPE)
6.
Menu 7
VIEW DIGITAL IMPUTS
7.
Menu 8
(MENU NOT USED)
8.
E
EXIT MENU
E.
Menu list of electronic board
Menus 0, 1 and 7 are Viewing Menus: they only allow the information displayed to be
read, and not modified. Menu 0 shows the appliance operating data in real time. Menu 1
shows the parameters that characterise the operation of the appliance and their current
values.
Menu 7 is to be used ONLY by the Robur TAC.
To view the information contained in these menus, proceed as illustrated in the para-
graph "How to acces the menus".
Menu 2 is an execution menu: it allows the operations of resetting the flame control unit,
error reset and the manual defrosting command to be performed.
To perform these procedures, see Paragraph 4.3 RESET OPERATIONS AND MANUAL
DEFROSTING
→
22.