Robotis DYNAMIXEL XM430-W210 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 34

background image

2/22/2018

ROBOTIS e-Manual

http://emanual.robotis.com/docs/en/dxl/x/xm430-w210/

29/34

This value indicates present voltage that is being supplied. For
more details, please refer to the

Max/Min Voltage Limit(32,

2. 4. 44. Present Temperature(146)

This value indicates internal temperature of Dynamixel. For
more details, please refer to the

Temperature Limit(31)

2. 4. 45. Indirect Address, Indirect Data

Indirect Address and Indirect Data are useful when accessing
two remote addresses in the Control Table as sequential
addresses. Sequential addresses increase Instruction Packet
efficiency. Addresses that can be defined as Indirect Address is
limited to RAM area(Address 64 ~ 661). If specific address is
allocated to Indirect Address, Indirect Address inherits
features and properties of the Data from the specific Address.
Property includes Size(Byte length), value range, and Access
property(Read Only, Read/Write). For instance, allocating
65(Address of LED) to Indirect Address 1(168), Indirect Data
1(224) can perform exactly same as LED(65).

Example 1

Allocating Size 1 byte LED(65) to Indirect Data

1(224).

1. Indirect Address 1(168) : change the value to ‘65’ which is

the address of LED.

2. Set Indirect Data 1(224) to ‘1’ : LED(65) also becomes ‘1’

and LED is turned on.

3. Set Indirect Data 1(224) to ‘0’ : LED(65) also becomes ‘0’

and LED is turned off.

Example 2

Allocating Size 4 byte Goal Position(116) to Indirect

Data 2(225), 4 sequential bytes have to be allocated.

1. Indirect Address 2(170) : change the value to ‘116’ which is

the first address of Goal Position.

2. Indirect Address 3(172) : change the value to ‘117’ which is

the second address of Goal Position.

3. Indirect Address 4(174) : change the value to ‘118’ which is

the third address of Goal Position.

4. Indirect Address 5(176) : change the value to ‘119’ which is

the fourth address of Goal Position.

5. Set 4 byte value ‘1,024’ to Indirect Data 2 : Goal

Position(116) also becomes ‘1024’ and Dynamixel moves.

Indirect Address
Range

Description

Back to Top ▲

«
...
27
28
29
30
31
...
»

Содержание DYNAMIXEL XM430-W210



































Отзывы:

Нет отзывов

Похожие инструкции для DYNAMIXEL XM430-W210

Бренд: JB Systems Страницы: 12

Бренд: A.MENARINI Страницы: 2

Бренд: MADRIX Страницы: 12

Бренд: Narcotrend Страницы: 47

Бренд: Eaton Страницы: 4

Бренд: d.s.f. Страницы: 8

Бренд: dbx Страницы: 2

Бренд: Eagle Group Страницы: 8

Бренд: Fellowes Страницы: 20

Aspect Q-CARD 100-4T

Бренд: idi Страницы: 38

SimMan 3G Trauma

Бренд: laerdal Страницы: 16

Бренд: laerdal Страницы: 16

Бренд: laerdal Страницы: 60

Бренд: laerdal Страницы: 4

Resusci Anne Simulator

Бренд: laerdal Страницы: 8

Nursing Baby VitalSim

Бренд: laerdal Страницы: 15

Бренд: TC Electronic Страницы: 67

Бренд: Tascam Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды