Robotics Bigmow, Руководство пользователя

Страница: 14 / 28

Installing the recharging station
Positioning the recharging station
When setting up the station, an ideal place must be found
which is both close to a power supply (220VAC) and on a rela-
tively level, steady surface, which allows at least 10 feet of
peripheral wire to be placed in a straight line in front of and
behind the recharging station.
The power connection must be made to a circuit breaker
(National Electrical Code Approved) safe for underground and
outdoor use.
The recharging station should be set back from the peripheral
wire in such a way that when your Bigmow goes to recharge, a
visible connection is made to the top and bottom charging
bars.
BIGMOW
1. Close to 220 AC power supply
2. Plug connected to a NEC approved
circuit breaker suitable for outside un-
derground service
3. Level surface
4. Peripheral wire straight for 10 feet in
front and behind station
5. Station to be set back from the periph-
eral wire line.
Recommendation for
the recharging station
PAGE 14