Robotics Bigmow, Руководство пользователя

Страница: 11 / 28

PAGE 11
It is advisable to let the local distributor install your Bigmow. He has the necessary equipment
and knowledge of how to install the peripheral wire. However, it is possible for you to install it
yourself by following the explanations given in this chapter. If you wish to increase your mowing
area after installation, you must contact your local distributor so that he may carry out the modifi-
cation(s), as only he is authorized to do. The guarantee does not cover problems arising after
modifications are carried out by the owner.
Installing the peripheral wire: land boundaries
Installing the peripheral wire: boundaries
Positioning boundaries in relation to the property
When placing the peripheral wire, the outer lim-
its of the mowing area must be taken into ac-
count.
If there is a fragile boundary (e.g. flowerbed)
just outside the mowing area, the peripheral
wire will have to be positioned 24 inches away
to prevent the Bigmow from causing damage.
When the boundary runs along a wall, it is advis-
able to provide a distance greater than 24
inches to avoid scraping unnecessarily along
the wall.
For boundaries such as planting beds or land-
scaped areas, a distance of 20 inches is possi-
ble. In this way, the grass will be cut right up to
the edge.
If the boundary lies on a slope in the lawn, the
distance must be increased by up to 4 inches
depending on the incline.
With regards paths or terraces on the same
level as the lawn, the Bigmow can encroach a
little on the path or terrace. The wire should be
placed 12 inches away from the edge of the
grass.
BIGMOW