background image

 

PAGE 21 

BIGMOW 

Using the 

BIGMOW :

BIGMOW : Summary for setting parameters 

• 

Demonstration Mode (does not mow) 

1. 

« Options » Menu  

2. O003:

 ; to change : 

3. Close 

bonnet 

 

• 

Silent charging (No beeps during re-
charge) 

1. 

« Options » Menu  

2. O004:

; to change : 

3. Close 

bonnet 

 

• 

Systematic mowing 

1. 

« Options » Menu  

2. O005:

  ; to change : 

3. Close 

bonnet 

 

• 

Anti-clockwise: Counter-Clockwise  

• 

direction (in systematic mode) 

1. 

« Options » Menu  

2. O006:

  ; to change : 

3. Close 

bonnet 

 

• 

Movement from centre to exterior of 
mowing area (in systematic mode) 

1. 

« Options » Menu  

2. O007:

  ; to change : 

3. Close 

bonnet 

 

• 

Movement from exterior to interior of 

mowing area (in systematic mode) 

1. 

« Options » Menu  

2. O007:- 

to change : 

3. Close 

bonnet 

 

• 

Phase inversion 

1. 

« Options » Menu  

2. O008:

  ; to change : 

3. Close 

bonnet 

 

• 

Direction of return to recharging station: 
Anti-clockwise 

1. 

« Options » Menu  

2. O009:

  ; to change : 

3. Close 

bonnet 

 

• 

Direction of return to recharging station: 
clockwise 

1. 

« Options » Menu  

2. 

O009:-  ; to change : 

3. Close 

bonnet 

Содержание Bigmow





























Отзывы: