Robot Coupe MP 800 Turbo, Руководство по эксплуатации

Страница: 9 / 62

7
ENGLISH
2)
The power mixer can
be rested against the rim
of the container but must
be tilted so that it does
not touch the bottom of
the container.
MP 800 Turbo.
An handle which will
help you to have a good
grip and facilitate the
moving of the machine.
3)
If using the power
mixer support (optio-
nal accessory), on the
top of the container, the
power mixer should be
positioned in the middle
of the support and at a
slight angle.
Do not operate the power mixer with the bell
straight up-and-down against the bottom of the
container
4) The splashguard should always be in place.
5) For optimum efficiency two thirds
2/3
of the tube
should be immersed in the product.
6) Always make sure that the bell is completely
immersed to avoid splashing and that the venti-
lation openings in the motor housing do not come
into contact with any liquid !
• WHISK FUNCTION
We recommend that you
hold the power mixer
by the handle and the
bottom of the motor unit.
You can also hold the
appliance by the handle
with one hand, leaving
the other hand free
to hold the bowl, if
necessary.
While processing we
recommend that you
move the whisk around
in the bowl, in order to
ensure that the mixture
is completely homoge-
neous.
We strongly advise you
to keep the whisk from
touching the sides of
the bowl. For maximum
e f f i c i e n c y , a t l e a s t
one-fifth of the whisk
length should be im-
mersed. We also strongly advise you to start the
processing at a low speed.
A white circle marked on the speed variation switch
indicates the speed dedicated to mashed potatoes
preparation.To reach this speed, turn the knob
coun ter clockwise until it stops and a slight detent is
felt . Under load the mixer will stop and start at one
seconds intervals.
• POWER CORD
After cleaning the machine,
wind the cord around the
specially designed lugs,
without stretching it too
much. This will prolong its
lifespan.
WORKING POSITION
• BLADE FUNCTION
1) Hold the power mixer
firmly by the handle and
the bottom of the motor
base and tilt it at a slight
angle. Move the mixer
around in the container
for complete processing.
POWER MIXER
ON THE PAN
SUPPORT