Robot Coupe MP 800 Turbo, Руководство по эксплуатации

Страница: 8 / 62

6
INTRODUCTION TO YOUR NEW
ROBOT-COUPE POWER MIXER
Robot-Coupe has developed a complete line of
power mixers. The features of each are described in
the table below.
The Robot-Coupe Power Mixers perform a host of
culinary feats. The mixer attachment will allow you
to make soups, vegetable purees and pulps while
the whisk attachment is ideal for making pancake
batter, mayonnaise, beaten egg whites, chocolate
mousse, butter sauces, whipped cream or smooth
fromage frais.
The variable speed function will enable you to
adjust the speed to suit each preparation and to
start the processing at a lower speed in order to
reduce splashing.
The power mixer is easily assembled and disassem-
bled for maintenance and cleaning.
OPERATING THE POWER MIXER
• OPERATION
The machine is supplied with a single-phase
moulded plug.
• CONTINUOUS OPERATION
8. Follow steps 1-6 above,
then : While the control but-
ton (CB) is pressed, press the
locking button (LB).
9. Release the control button
(CB).
10. Release the locking
button (LB), and the power
mixer will run continuously.
11. To stop the power
mixer, press and release the
control button (CB).
• VARIABLE-SPEED OPERATION
Follow steps 1 to 6 above, then change the speed
of the motor by turning the button (VS) toward the
maximum or minimum as required.
It is advisable to start at a low speed when using the
whisk.
Principal of automatic speed regulation : Once you
have selected the right speed, allow the mixer to run
on it’s own. The speed will remain the same, even if
the consistency of the product changes.
• MASHED POTATOES FUNCTION
( MP 350 Turbo Combi, MP 450 Turbo Combi,
MP 450 Turbo FW).
A self-regulating speed
system
has been specially developped for
pureeing tasks using the whisk.
Before connecting the
machine, connect ne-
cessarily the
power cord to
the machine.
(see opposite
picture)
Make sure that the grip of the power cord is pushed
well (it is necessary to cross necessarily 2 notches of
the grip, if it is not the case it will be impossible to
put on the control button.
The power mixer is equipped with electrical current
and temperature overload protection. If the power
mixer stops unexpectedly you may try to restart it
by following steps 3-5 below. If the power mixer
does not restart, allow it to cool for a period of up
to 30 minutes and the temperature overload will
automatically reset. You should then be able to
restart following steps 3-5 below.
1. Check that the control button
(CB) is in the released position.
2. Connect the cord to the
power supply
3. Put the tube into the product
with the bell completely
immersed and the splash
guard in place.
4. Press and hold down the
safety button (SB).
5. Press the control button (CB)
and the power mixer will start.
6. Release the safety button
(SB).
7. To stop the power mixer, release the control
button (CB).
LB
VS
SB
CB
Models
Variable
Speed
Mixer
attachment
Whisk
attachment
Mixing tool
attachment
MP 350 Turbo
•
•
• •
MP 350 Turbo V.V. • •
• •
MP 450 Turbo
•
•
• •
MP 450 Turbo V.V. • •
• •
MP 550 Turbo
•
•
• •
MP 600 Turbo
•
•
• •
MP 800 Turbo
•
•
• •
MP 350 Turbo Combi • • •
•
MP 450 Turbo Combi • • •
•
MP 450 Turbo FW •
•
•
•
MP 450 Turbo FW XL •
• •
•
First Notche
2nd notche
SB
CB
LB
TUBE
BELL
SPLASH
GUARD
MOTOR
HOUSING