RoboSense LiDAR Helios-1615 Скачать руководство пользователя

Страница: 6 / 62

RS-Helios-16P User Manual

1. Manufacturer Information

Suteng Innovation Technology Co., Ltd. (RoboSense)

Building 9, Block 2, Zhongguan Honghualing Industry Southern District, 1213 Liuxian Avenue,

Taoyuan Street, Nanshan District, Shenzhen, China

Landline: 0755-86325830

Mobile Phone: +86 15338772453(Marketing & Sales Cooperation)

Email: [email protected] (New)

Working hours from Monday to Friday 09:00-18:00(GMT/UTC +8)

2 Disclaimer of Liability

This manual is protected by copyright. Any rights arising from this copyright are owned by

RoboSense. Reproduction of this manual or part of the manual is only permitted within the legal

scope of the copyright law. Without obtaining any authorization, this document shall not be

abridged or translated. The trademarks mentioned in this document are the property of their

respective owners. RoboSense reserves all rights.

3 Certifications

特别说明：

This manual is updated from time to time without prior notice, to get the latest version, please visit

RoboSense company website to download or contact the RoboSense Technical Support or Sales.

Содержание LiDAR Helios-1615































































Результаты поиска

Содержание LiDAR Helios-1615

Отзывы:

Похожие инструкции для LiDAR Helios-1615

Бренды по названию

Популярные бренды

RoboSense LiDAR Helios-1615, Руководство пользователя

Результаты поиска

Содержание LiDAR Helios-1615

Отзывы:

Похожие инструкции для LiDAR Helios-1615

Бренды по названию

Популярные бренды