Roborock S6 Series Скачать руководство пользователя страница 14

Страница: 14 / 67

Roborock Customer Service Center - Technical Support

machine can effectively detect obstacles in front upon a slight physical impact.

8. Q: Why is there a circular orange rotating component protruding from the top? Is it normal

that the top cover can be pushed? Is it normal that the top cover is loose?

A: The protruding part on the top is the LDS (laser distance sensor), which is a core component

of the machine. It rotates constantly at 300 RPM to obtain topographic data of the environment

in which the machine is placed. The laser distance sensor is fitted with an external protective

cover. On the bottom of the LDS top cover is the LDS cover bumper sensor, which is capable

of detecting any foreign matter that may get stuck in the laser head and enabling the machine

to automatically move backwards to prevent the machine from getting stuck.

9. Q: What's the hole in the front of the machine?

A: This is the machine's recharge sensor, which allows to machine to align with the dock charger

for recharging.

10. Q: What are things on the two rear sides of the machine?

A: On the rear left of the machine is the air outlet and on the right is the speaker. The black

thing visible inside the air outlet is the soundproof sponge that is used to reduce the noise from

the air outlet.

11. Q: What are the two metal tabs on the bottom of the machine?

A: Two metal tabs on the bottom of the machine are the positive and negative terminals of the

charging contact. They come into contact with the charging tab of the dock charger to enable

the machine to charge properly.

12. Q: What's the black area on the white dock charger?

A: This is the signal transmission area for the dock charger where the IR recharge signal is

transmitted to guide the machine to correctly align with the recharge port for charging.

13. Q: What is the metal strip that can be pressed on the bottom of the dock charger?

A: This is the charging tab of the dock charger. It comes into contact with the charging contact

on the bottom of the machine body to enable the robot to charge and it is flexible to ensure

Содержание S6 Series




































































Результаты поиска

Содержание S6 Series

Отзывы:

Похожие инструкции для S6 Series

Бренды по названию

Популярные бренды

Roborock S6 Series, Часто задаваемые вопросы

Результаты поиска

Содержание S6 Series

Отзывы:

Похожие инструкции для S6 Series

Бренды по названию

Популярные бренды