Roborock S6 Series Скачать руководство пользователя страница 29

Страница: 29 / 67

Roborock Customer Service Center - Technical Support

6. Q: Will long-term charging consume more power? Will overcharging shorten the service life

of the battery?

A: Charging stops after the battery is full. The motherboard is powered directly from the dock

charger and the battery is in standby mode and thus the battery performance will not be affected.

The machine consumes very little power (less than 3 W) when not in use. To maintain the best

battery performance, please try to keep the machine connected to the dock charger when it is

left unused.

7. Q: Why does it take longer to charge in summer?

A: The machine is designed with a charge and discharge management system. In summer, the

battery may be hot immediately after cleaning. To extend the service life of the battery and

ensure charging safety, charging will start only after the battery temperature reduces. Thus, it

is normal that charging takes longer in summer.

User complaints about the charging speed slowing down

(Updated on May 31, 2018)

A: When used at high or low temperatures, the machine will automatically reduce the charging

speed so as to extend battery life. Starting from June 11, the charging time is 5 hours when

used below 16 degrees Celsius, and 10 hours when used below 7 degrees Celsius (for all

models).

8. Q: Why does it fail to power on in winter?

A: Please ensure that the machine operates in an environment with a temperature of no less

than 0°C; otherwise, the machine may not power on so as to protect the battery. This is the

same as the low temperature battery protection mechanism used in iPhones.

9. Q: Will the laser head be damaged due to the interference from a full-length mirror?

A: No. Please rest assured that a full-length mirror will not impact the cleaning operation of the

machine.

10. Q: How long can the machine work for once fully charged?

A: This depends on the operating time, floor material and mode of operation. For a common

floor without a carpet, a fully charged machine can work for about 2.5 hours in Standard mode,

less in Strong mode and longer in Silent mode.

Содержание S6 Series




































































Результаты поиска

Содержание S6 Series

Отзывы:

Бренды по названию

Популярные бренды

Roborock S6 Series, Часто задаваемые вопросы

Результаты поиска

Содержание S6 Series

Отзывы:

Бренды по названию

Популярные бренды