Roborock S6 Series Скачать руководство пользователя страница 21

Страница: 21 / 67

Roborock Customer Service Center - Technical Support

13. Q: What should I do when it always pushes a waste bin or a slipper?

A: It is hard for the machine to detect light objects. Please gather up objects on the floor before

starting the machine so as to prevent these objects being pushed or pulled during operation.

14. Q: Can I move the machine when it is working?

A: You can pause the machine mid-cycle and move it within a small range. However, if you

move the machine too far, the machine may restart cleaning due to route planning failure.

The

probability of route planning failure greatly reduced when map saving move is turned on and a

map is saved.

15. Q: Can it work normally in total darkness?

A: Of course. All sensors attached on the machine body can work well in a completely dark

environment.

16. Q: Is 5GHz Wi-Fi or 802.1x verification mode supported?

A: Only 2.4GHz Wi-Fi is supported. Encryption methods that require user names to be entered,

such as 5GHz and 802.1x, are not supported.

17. Q: Why does the robotic vacuum cleaner only support 2.4G networks? (Updated on August

13, 2018)

First of all, Mi Home app supports 2.4G network connections.

Secondly, the 2.4G network is a traditional Wi-Fi network band. Advantages: strong penetration

ability and highly adaptable to its surroundings.

Disadvantages: less network data can be transmitted per unit time (compared to 5G).

The 5G network is a Wi-Fi network band that has become popular in recent years. Advantages:

more network data can be transmitted per unit time.

Disadvantages: easily blocked by objects, resulting in signal attenuation.

There are a variety of places smart devices can be located in a home. If the home environment

is complex, then it is possible that the places where these smart devices located are network

blind spots or spots where the network signal is seriously attenuated when using 5G Wi-Fi. On

Содержание S6 Series




































































Результаты поиска

Содержание S6 Series

Отзывы:

Похожие инструкции для S6 Series

Бренды по названию

Популярные бренды

Roborock S6 Series, Часто задаваемые вопросы

Результаты поиска

Содержание S6 Series

Отзывы:

Похожие инструкции для S6 Series

Бренды по названию

Популярные бренды