Roborock S6 Series Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 67

background image

Roborock Customer Service Center - Technical Support

34

on the main body of the machine flashes every 8 seconds. The machine will automatically
power off after 12 hours or more in sleep mode. In addition, it will automatically power off if the
battery is too low.

Power consumption is about 20%-30% during this period.

14. Q: Can scheduled cleaning be enabled after the machine is powered off?

A: After the machine is powered off, scheduled cleaning will not be effective until you press and

hold the ON/OFF key to power it on or place the machine onto the dock charger to automatically

power it on.

15. Q: Why can't the machine cross a curtain or bed sheet?

A: The laser distance sensor will identify a curtain or bed sheet as an inaccessible area and

thus will not try to cross it. To clean it, please lift up the bed sheet or curtain from the floor

16. Q: Can the machine memorize a map? How do I to clear the memory?

A: During a cleaning task, the machine will memorize a map. It will return to the dock charger if

the battery is low and then continue working once charged. The map will be automatically

cleared at the end of the cleaning task, without the need for manual intervention.

In map saving mode, after the cleaner starts cleaning from the dock changer and following a

successful automatic recharge, the map will be automatically saved and used for the next

cleaning task. In this case, the last used map can be restored or reset/cleared in map

management.

17. Q: What should I do when I do not want to continue cleaning or I would like to restart

cleaning?

A: Follow the operations below to end and restart cleaning: 1. Pick the machine up and put it

onto the dock charger, and start cleaning after you are alerted with the message that the

machine is charging. 2. Press the Recharge key to return the machine to the dock charger, and

start cleaning after you are alerted with the message that the machine is charging. 3. Press and

hold the Cleaning key to power the machine off and start cleaning after the machine is powered

on again. 4. Press the Recharge key to enable spot cleaning and pause it, and then start

cleaning.

«
...
32
33
34
35
36
...
»

Содержание S6 Series




































































Отзывы:

Нет отзывов

Похожие инструкции для S6 Series

Бренд: Kärcher Страницы: 144

Бренд: Unitekno Страницы: 52

Бренд: eta Страницы: 44

Steam Station II

Бренд: Haan Страницы: 8

Бренд: Vax Страницы: 20

NT 561 Eco Package Craftsmen

Бренд: Kärcher Страницы: 23

Бренд: Kärcher Страницы: 116

Бренд: Vax Страницы: 12

Intelli-Pro 3 XJ-3100A

Бренд: Surround Air Страницы: 8

AIRBELT E1 BOOST

Бренд: Sebo Страницы: 16

Бренд: Nevir Страницы: 11

Бренд: Tacony Страницы: 16

Бренд: Magnum Industrial Страницы: 6

Бренд: Hoover Страницы: 57

Бренд: Zelmer Страницы: 50

Бренд: Daewoo Страницы: 6

Бренд: Dadam micro Страницы: 12

Бренд: Nikro Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды