29
Figure 2.2
Weekly program menu
Set Zone: Base
Set Zone: A
Set Zone: B
Weekly program
Entry points
Skip next start
Islands on/off
Work time
External Base
Update program
Program type
Program on/off
Display program
2.1.1
2.1.2
2.1.1.1
2.1.1.2
2.1.1.3
2.1.1.4
2.1.1.5
2.1.1.6
Set Zone: Base
Set Zone: A
Set Zone: B
Weekly program
Entry points
Skip next start
Islands on/off
Work time
External Base
Update program
Program type
Program on/off
Display program
2.1.1
2.1.2
2.1.1.1
2.1.1.2
2.1.1.3
2.1.1.4
2.1.1.5
2.1.1.6
2.1 Zones setup
The
‘Zones setup’
menu allows user to set the
parameters that are specific per zone
.
It is possible to set up to three different zones: zone Base, zone A and B, when the main zone is
Base Zone
, the area where the Base Station is located (for multi zones setup refer to paragraph
1.2.2).
2.1.1 Set Zone: Base
Enables to set all the parameters that are specific to Zone Base (paragraphs 2.1.1.1 to 2.1.1.6).
2.1.1.1 Weekly program
The ‘
Weekly program’
menu consists of four options (figure 2.2):
a. Update
program – allows updating the program and changing the settings.
b. Program type – allows setting the program type, when every type gives a different level of
the parameter the user can set (more details will follow).
c. Program
on/off - Allows user to shut off the weekly program when setting the ‘
Program
’ to
‘off’
. A shortcut to shut off the weekly program is by pressing the main switch while Robomow
is in the Base Station. It will set the program to 'off' but will allow manual start by pressing the
GO button as well as charging.
d. Display
program - the weekly program display is used to show the active days and additional
information about the last week operations (more details will follow).
When setting weekly program by area, the active days will be as shown in the table below.
Active days per area
Area m
2
Mon
Tue
Wed
Thu
Fri
Sat
Sun
0-50
√
√
50-100
√
√
100-150
√
√
√
150-200
√
√
√
√
200-250
√
√
√
√
√
250-300
√
√
√
√
√
√
300 and up
√
√
√
√
√
√
√