12
©
2020 DJI All Rights Reserved.
3v3 Mode
You may arbitrarily select six sets of Robot Side configurations according to the Robot Side configuration
table and install them to six robots respectively. Each set of Robot Sides can be set as Red Team or Blue
team. Make sure that three of them are set as Red team and the rest of them as Blue Team. The Robot
Side can choose whether to set up a LAN or use a base for the 3v3 contest.
The table below gives an example of a starting lineup:
Combatants
Robot type
Quantity
Remarks
Red team
Standard
1
/
Hero
1
/
Engineer
1
/
Base
0-1
Optional
Blue team
Standard
1
/
Hero
1
/
Engineer
1
/
Base
0-1
Optional
The table below shows the configurations of the Referee System modules required to set up the 3v3
combat system above:
Module Name
Quantity
Remarks
Main Controller Module
6
/
Power Management Module
6
/
Light Indicator Module
6
/
Large Armor Module
0-8
/
Small Armor Module
0-16
/
Speed Monitor Module
(17mm Projectiles)
0-4
Can be ignored if the launch speed is unlimited
Speed Monitor Module
(42mm Projectiles)
0-2
Can be ignored if the launch speed is unlimited
RFID Interaction Module
0-6
Can be ignored if no interaction with a battlefield is
required
VTM Transmitter
6
/
VTM Receiver
6
/
