RoboBuilder DIY Robot kit Скачать руководство пользователя страница 84

Страница: 84 / 110

Chapter 3. Operating RoboBuilder

Click [Return] to save the change and close.

If the adjusted posture is not perfect, repeat the step 01 to 06.

Check the desired IDs of wCK modules to be adjusted and click [Close].

If you touch and handle the wCK modules with your hands, you can feel the selected modules
are now free of Torque and freely movable.

Now the selected wCK modules are in

“

Teaching Mode

”

. The unselected wCK modules are powered with torque

and difficult to rotate, which is set to help the robot stand still.

When finished with manual posture adjusting, click [Capture] to load in the change.

The [Capture] button returns to [Get Pos] buttion.

Use your hands to freely adjust the desired posture of the robot.

Be careful not to forcefully rotate the unselected wCK modules.

Содержание DIY Robot kit















































































































Результаты поиска

Содержание DIY Robot kit

Отзывы:

RoboBuilder DIY Robot kit, Руководство пользователя, Страница: 84 / 110

Результаты поиска

Содержание DIY Robot kit

Отзывы: