RoboBuilder DIY Robot kit, Руководство пользователя, Страница: 104 / 110

105
Chapter 4. Troubleshooting
The Basic Postures of the three standard robot platforms are as shown in below pictures. If a robot
doesn
’
t show the exact Basic Posture when you push the red button( ) on the remote controller,
the robot doesn
’
t move properly or the red Error lamp is turned on, then the robot may not be built
correctly or may have another problem.
In this case, please refer to Chapter 4 [Troubleshooting] to solve the problem. Always make sure that
you start the robot from the correct Basic Posture. Trying to play the robot continuously with the Error
lamp on may cause a serious product failure or damage.
(When Error lamp is turned on, the robot doesn
’
t take any command signals from the remote control
for 30 seconds, which is designed to protect possible damage to product.)
[Cause]
STEP 01
Is battery charged enough?
When shipped from the factory, the battery pack enclosed in control box is not charged. So please
use the power adapter to operate robot the first time. The enclosed power supply is used not only
for recharging battery but also for supplying direct power to the robot. So it can be used as an
alternative to the battery and can play the robot continuously (This function is not supported when
recharging battery).
Connect the power adapter first before you start playing the robot. Or you can recharge the battery
first by pressing PF1 button and PF2 button simultaneously for 3 seconds. It takes one and a half
hour for the battery to be fully recharged.
[Troubleshooting]
[HUNO Basic Posture] [DINO Basic Posture] [DOGY Basic Posture]
When Robot doesn
’
t take correct Basic
Posture.