28
Headphone socket
A 3.5mm
Headphone Socket
located on the rear of your radio is provided for use with either
headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker.
Please be aware that the sensitivity of headphones can vary widely. We therefore recommend
setting the volume to a low level before connecting headphones to the radio.
IMPORTANT:
Excessive sound pressure from earphones and headphones can cause
hearing loss.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
Aux In
1
Auxiliary input socket
1. Connect a stereo or mono audio source (i.e. CD player, MP3 player, etc.) to the
Auxiliary input
socket.
2. Press
On/Standby
to switch on the radio.
3. Press
Mode
until the display shows
'Aux In'
.
4. Adjust the
Volume
control on your player and on the radio for comfortable listening.
5. Remove the cable from the
Auxiliary input
socket or press
Mode
to cancel Auxiliary
Input mode. Note that audio played via the auxiliary input will be played in mono
through the speaker and in stereo through stereo headphones.
Note:
If the radio is in Auxiliary input mode with no input signal being applied for more
than 15 minutes then it will automatically switch to the standby mode. The LCD will
revert to the standby mode clock display. To use the radio again, simply press the On/
Standby button to switch it on.
Aux In
1
USB socket for smartphone or tablet charging
Your radio has a USB socket which can be used for charging a smartphone, tablet or other similar devices.
Charge time may vary and in some cases may take longer to charge than when using the manufacturers
charging unit supplied with the device.
1. Ensure your radio is plugged in and powered from the mains.
2. Connect your device to the USB charging socket at the rear of your radio.
3. Your device will begin to charge. Once your device has charged remove the USB lead.
Aux In
1
Mode
Aux In
16.34
05/06/2017
AUX
