Roberts Gorden Dualair DA260G Series, Инструкция по установке, наладке, обслуживанию и эксплуатации

Страница: 27 / 78

Page 25
3.9.1.2 Fan Controls
The fan is designed to operate automatically providing there is a constant supply to the main terminals.
However, a switch wired between terminals L & 1 in the terminal block at the side of the heater will
provide for constant running of the fan/s.
It is acceptable for the fan to operate continuously from an external control, with the burner/cooling
cycling on and off, providing that the fan run-on at close down of the heating operation is not impaired.
See the Controls Table in Section 5 for more information.
3.9.2 Siting of temperature Controls or Room Thermostats
The temperature controls or room thermostats should be mounted on a wall or column at a height of
approximately 1.5 metres from the floor of the building being heated/cooled. It is important for both
comfort and fuel economy that the control or thermostat is sited where it will monitor an average room
temperature i.e. keep clear of cold draughts from doors, windows etc., similarly it should be kept out
of the direct path of air from the heater. Areas of little air movement e.g. corners, should also be
avoided.