Robe StageQube 324, Руководство пользователя

Страница: 4 / 19

4
CAUTION!
Unplug mains lead before opening the housing!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOU INITIAL START - UP!
1. Safety instructions
every person involved with installation and maintenance of this device have to:
- be qualilfied
- follow the instructions of this manual
CAUTION!
Be careful with your operations.
With a high voltage you can suffer
a dangerous electric shock when touching the wires!
this device has left our premises in absolutely perfect condition. in order to maintain this condition and to en-
sure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes
written in this manual.
Important:
the manufacturer will not accept liability for any resulting damages caused by the non-observance of this
manual or any unauthorized modification to the device.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
never let the power-cord come into contact with other cables! Handle the power-cord and all connections with
mains with particular caution!
Make sure that the available voltage is not higher than stated on the rear panel.
always plug in the power plug last. the power-plug has to be accessible after installing the device.
Make sure that the power cord is never crimped or damaged by sharp edges. Check the device and the power
cord from time to time.
always disconnect from the mains when the device is not in use or before cleaning it. Only handle the power-
-cord by the plug. never pull out the plug by tugging the power-cord.
The electric connection, repairs and servicing must be carried out by a qualified employee.
Do not connect this device to a dimmer pack.
2. Operating and structural requirements
2.1 Operating determinations
Do not shake the device. Avoid brute force when installing or operating the device. NEVER place the fixture on
the ground with the leD – side down.
When carrying the fixture, always use the fork connectors at the sides. They work well as handles. Don’t grab
the fixture by the diffusor.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the fix -
ture.