Robe StageQube 324, Руководство пользователя

Страница: 18 / 19

8
5.5.5 Media Player
the built-in Media Player has got the basic functionalities: Play, Pause, Stop, repeat, and a scrubber bar.
the software can play the following formats: mpg/mpg, wMV and certain aVi-Files. VOB-Files from uncryp-
ted (not copy-protected) DVDs are also supported. The resolution is limited to 800 x 600 px for your source
video.
the video codecs that can be played back are not part of QubeControl. it is necessary to have the video codecs
you want to play back installed on your computer.
if you have windows Media Player installed, most common codecs should already be on your machine.
to download the newest windows Media Player, go to www.microsoft.com.
tip:
to see which codecs are installed in your windows system, go to “System -->Sounds -->Hardware. Double-click
the line “Video codecs” and change to the “Properties” tab. Here you see a list of all installed video codecs.
5.5.6 VGA-In and Test
The interface of this area works in conjunction with the selected source (see n
o
1).
If you chose “VGA-In” as video source (see n
o
1), the “Start”-button begins the process of VGA capturing. You
see the incoming video in the Preview-area (see n
o
4).
If you selected “Line Pattern” as source, you can set the speed of the Line Pattern and click “Start”. You should
see three sweeping vertical lines in red, green and blue, followed by three sweeping horizontal lines. the pattern
is looped until you press the “Stop” button.
If you selected “Test” as source, you can manually test the red, green and blue LEDs with the R,G and B fa -
ders.
The “Line Pattern” and “Test” features are especially helpful to check if the whole StageQube324 array works
properly. If you encounter “jumping” or broken lines or if some of the StageQube324s are completely dark, start
the Discovery process again by clicking the “Discovery button” (see n
o
7).
5.5.7 Qube Layout
the Discovery button in this area starts the StageQube-Discovery process again. this is helpful if you want to
change the layout of your StageQube34 array, or if you encounter any problems with the array.
6. Technical specifications
Electrical specification:
- integrated Power supply
- Input voltage:110-240V @ 50/60Hz
- Power consumption: 220W max.
-
λ
=0.95 at maximum charge
- leakage current<=360ua
Pixel:
- 18x18= 324 RGB- high efficiency LEDs (506,25 px/m )
- internal resolution: 4 Bit
- SBaM Modulation
- temperature compensated leD drivers