Robe Robin miniPointe, Руководство пользователя

Страница: 21 / 38

21
controller. In this case, the item has to be On.
DMX L On
- The item allows you to strike the lamp automatically after 26 seconds
if DMX signal is present on the fixture´s DMX input.
Lamp Off if not DMX - The item allows you to switch off the lamp automatically after
2 minutes if DMX signal is missing on the fixture´s DMX input.
Lamp D - The item allows to set time delay( 0-90sec.) before igniting the lamp by DMX
command. If the lamp is started directly from the control panel, the set time delay
will be ignored.
Lamp Sn - Select this item to switch the light sensor off. The option On is intended for a standard operation.
Display - Display adjusting . This menu allows you to adjust the display behaviour.
Turn - This function turns the display by 180°.
On/Off T - This function allows you to keep the display permanent on or turn it off
two minutes after last pressing any button on the control panel.
Contrast
- Use this function to adjust contrast of the display (0-100%).
Backlight
- Use this function to adjust backlight of the display (0-100%).
BLC DMC - Blackout during movement correction . Set this option on if you wish to close light
output during the time when the head goes to its correct position, which has been changed by an
external force.
Act Blc - Active blackout . Use this menu if you wish to close the light output during effect changes.
P/T Mov - The menu item allows to close light output while the pan (tilt) position
is changing.
GWh Mov - The menu item allows to close light output while colours are changing.
StG Mov - The menu item allows to close light output while gobos are changing.
Mic Sens - Microfon sensitivity . Enter the menu if you want to adjust the microphone sensitivity ( 1-max.,
19-min.).
Fans
-
Fan mode
. Use the menu to set the fixture fans to max. fan power mode ("
High
") or to auto-control
mode (" Auto ").
Temp Uni - Temperature unit . Use the menu item to change temperature unit from °C to °F.
I Ef Pos - Init effect positions . Use the menu to set all effects to the desired positions at which they will stay
after switching the fixture on without DMX signal connected.
Defaults - The menu item allows to set all fixture parameters to the default (factory) values.
6.4 Lamp on/off (Lamp)
On - Lamp on . Use the menu item to switch the lamp on.
Off - Lamp off . Use the menu item to switch the lamp off.
6.5 Manual Control (Manual)
Manual C - Manual control . Use the menu to control all fixture channels by means of the control panel.
Pan - a pan movement
Pan F - a fine pan movement
Tilt - a tilt movement
Tilt F - a fine tilt movement
P/T S a pan/tilt speed
Powr - power/special functions
ColWh - a colour wheel movement
ColWh F a fine colour wheel movement
Frost T - a frost time
Color T - a colour wheel time
STGob T - a static gobo wheel time