Robe Robin miniPointe, Руководство пользователя

Страница: 20 / 38

20
is necessary. If cleaning is required, clean all air filters and change the value in this menu
on acceptable level. Min. level of alert period is 10 hours, max. is 300 hours.
R Ti - Remaining Time .The item allows you to read the time which remains to cleaning
air filters.The time period is set in the menu mentioned above.
Expired time period is signalled by a negative mark (-) at the time value and a warning
message on the display.
Clean the air filter and reset the counter by pressing the press and hold both [NEXT] and
[PREV] buttons and the [Enter] button at the same time.
DMX In - DMX readout. The menu is used to read DMX values of each channel received by the fixture.
Hea Temp - Head temperature . The menu shows temperature of the fixture head.
Current - A current temperature in the fixture head.
Highest - A maximum temperature of the the fixture head since the fixture has
been fabricated.
High Res
- A maximum temperature of the the fixture head since the counter
was last reset.
In order to reset this counter, press and hold both [NEXT] and [PREV] buttons and the
[Enter] button at the same time.
Bas Temp - Base temperature . The menu shows temperature of the fixture base.
Current - A current temperature in the fixture base.
Highest - A maximum temperature of the the fixture base since the fixture has
been fabricated.
High Res - A maximum temperature of the the fixture base since the counter
was last reset.
In order to reset this counter, press and hold both [NEXT] and [PREV] buttons and the
[Enter] button at the same time.
Sw Ver
-
Software versions
. Select this item to read the software version of the fixture modules.
IC-1
- A pan/Tilt processor
IC-2
- EEprom
IC-3 - A Color wheel/static gobo wheel/shutter/focus processor
IC-4 - A Prism/frost processor
6.3 Personality (Pers)
DMX Pres - DMX preset . Use the menu to select desired channel mode.
Mode 1 - 20 control channels
Mode 2 - 15 control channels
Mode 3 - 25 control channels
Pan Rev
-
Pan reverse
. The item allows to invert pan movement.
Tilt Rev - Tilt reverse . The item allows to invert tilt movement.
P/T Mode - Pan and Tilt movement mode . Use this menu to set mode of the pan/tilt movement.
Speed - Both Pan and tilt will move with the same speed as adjusted at the channel 5
"Pan/Tilt speed, Pan/Tilt time".
Time – The pan and tilt will move with different speeds and they will come at
the same time to the end point of their tracks (pan and tilt use their optimal speeds).
Time of the pan/tilt movement (25.5 sec. max.) is set by the channel "Pan/Tilt speed, Pan/Tilt
time".
P/T Feed - Pan and Tilt Feedback . The menu item allows to return the mowing head to the required pan/tilt
position after changing the position by an external force if this option is set on.
Note. The Pan/Tilt Feedback should be permanent On, the option Off is not suitable for standard operation and
the head of the fixture can be damaged!
Lamp Pr - Lamp preset . Use this menu to set behaviour of the fixture lamp.
Lamp Au - If the item is On, the lamp will be automatically turn on after switching
the fixture on.
DMX Off - The item enables to switch the lamp off via DMX command from DMX