Robe Robin DL7F Скачать руководство пользователя страница 36

Страница: 36 / 58

11. Maintenance and cleaning

It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build

up on or within the fixture. Otherwise, the fixture‘s light-output will be significantly reduced. Regular cleaning will

not only ensure the maximum light-output, but will also allow the fixture to function reliably throughout its life.

A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances

should alcohol or solvents be used!

DANGER !

Disconnect from the mains before starting any

maintenance work

The front objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing

the light-output very quickly. The cooling-fans should be cleaned monthly.

The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.

Gobo wheels and the internal lenses should be cleaned monthly.

Remove dust and dirt from the fans and cooling vents using a soft brush and vacuum-cleaner.

Important! Check the air filters periodically and clean before they become

clogged!

Clean the air filters placed in the head´s covers and the base. Use a vacuum cleaner, compressed air or you

can wash them and put back dry.

After replacing the air filters, reset the elapsed time counter in the menu "Information"

(Information--->Air Filters---> Elapsed Time).

Replacing the fuse.

Before replacing the fuse, unplug mains lead.

1) Remove the fuse holder on the rear panel of the base with a fitting screwdriver from the housing

(anti-clockwise).

2) Remove the old fuse from the fuse holder.

3) Install the new fuse in the fuse holder (only the same type and rating).

4) Replace the fuseholder in the housing and fix it.

11.1 Disposing of the product

To preserve the environment please dispose or recycle this product at the end of its life according to the local
regulations and codes.

12. ChangeLog

This section summarizes all types of changes in the user manual.

Version of the

manual

Date of issue

Description of changes

1.1

31/08/2016

Added chapter "Installing the top hat "

DMX protocol ver. 1.3 (Colour mix control channel, 45DMX= default

1.2

04/11/2016

Added optional accessories: Top hat DL7F Wide, Top hat DL7F Narrow

1.3

15/12/2016

DMX protocol ver. 1.4, changes in menu Personality

1.4

04/04/2017

DMX protocol ver. 1.5 (colours renamed on Virtual colour wheel)

1.5

25/05/2017

Top hat DL7F Wide removed from optional accessories

May 25, 2017

All Specifications subject to change without notice

Made in ROBE Lighting s.r.o., Palackého 416, 757 01 Valašské Meziříčí, Czech Republic

Содержание Robin DL7F



























































Результаты поиска

Содержание Robin DL7F

Отзывы:

Похожие инструкции для Robin DL7F

Бренды по названию

Популярные бренды

Robe Robin DL7F, Руководство пользователя

Результаты поиска

Содержание Robin DL7F

Отзывы:

Похожие инструкции для Robin DL7F

Бренды по названию

Популярные бренды