25
described below
Blackout DMC
- Blackout during movement correction. Set this option On if you wish to close light
output during the time when the head goes to its correct position, which has been changed by an
external force.
Active Blackouts
- Use this menu if you wish to close the light output during effect changes.
Pan/Tilt Moving
-The menu item enables to close light output while the pan or tilt is moving.
Theatre Mode
- The mode reduces noise of the fixture due to adjustment of the fans speed.
Off
- The option is disabled
Quiet
- After selecting this item, the option "Fan Noise Level" is accessible where desired level of fans
noise can be set and a speed of following effects is reduced: zoom, focus, iris and framing shutters macro.
Note: The light output of the fixture is noticeably reduced at low fans speeds.
Colour Calibration Mode
- the function switches on the control of colours. This function has to be set on if all
settings in the menu "Output mode " are to work correctly.
Colour Mixing Mode
- This item allows selection between RGB and CMY mode. In all 3 or 7 color controlling
modes, all internal 7 colors are always utilized where possible.
UV Stability
- If this function is on, UV colour is reduced and mixed colours are more uniform.The function does
not influence calibrated white colours.
Wavelength Correction
- If this function is on, 7 base colours of the light source (red,amber...light green) are
corrected according to the corresponding wavelengths in order to get to get same colours from more fixtures.
The function does not influence calibrated white colours.
Chromatic White
- If this function is on, CTC channel influences colours and calibrated white colours.
If this function is off, CTC channel influences calibrated whites only.
Output mode
- the item allows you to select desired calibration mode for white colours.
Intensity
- Max. light intensity for calibrated whites (2700K-8000K) at CTC channel.
CRI
- Max. CRI for calibrated whites (2700K-8000K) at CTC channel. This option has
the following other options in the menu CRI Settings:
Output Uniformity
-
On
- Intensities of calibrated whites are set at certain levels,
which are the same for all fixtures.
Off
- Intensities of calibrated whites may vary from fixture to
fixture.
Output Consistency
- The option allows to set temperature (30°C - 65°C) of
the LEDs source up to which the light output will be consistent (a current ambient
operating temperature has to be taken into account when this temperature is
choosing). The temperatures of the LEDs source are stated in the menu
" LEDs Temperatures" (tab Information). All current temperatures in this menu
should be below (or equal to) the temperature set in the menu "Output Consistency".
If some current temperature exceeds the value set in the menu
"Output Consistency", the light intensity, which was kept at the same level,
will
fall
slightly.
CRI selection
- The option allows to choose desired CRI value (70, 75, 80,
85, 90+).
Tungsten effect simulation
- This function simulates behaviour of a halogen lamp during dimming at calibrated
whites 2700K-4200K. You can select from various lamp wattage simulation: 750W, 1000W, 1200W, 2000W,
2500W.
Init Effect Positions
- Use the menu to set all effects to the desired positions at which they will stay after
switching the fixture on without DMX signal received.
Screen Settings
- Use this menu to change the touch screen settings.
Display Intensity
- The item allows to control the intensity of the screen (1-min., 10-max.).
Screen saver Delay
- The item allows you to keep the screen on or to turn it off automatically after 1-10
minutes after last touch (or pressing any button on the control panel).
Touchscreen Lock
- The item allows you to lock the screen after last touch (or pressing any button on the
control panel). The time delay can be set in range of 1-10 minutes.To unlock the screen, press the
[ENTER/Display On] button.
Recalibrate Touchscreen
- The item starts calibration of the touchscreen. Follow the instructions on
Содержание Robin DL7F
