Robe Robin DL7F Скачать руководство пользователя страница 8

Страница: 8 / 58

4.5 Rigging the fixture

A structure intended for installation of the fixture(s) must safely hold weight of the fixture(s) placed on it. The

structure has to be certificated to the purpose.

The fixture(s) must be installed in accordance with national and local electrical and construction codes and

regulation.

For overhead installation, the fixture must be always secured with a safety wire that

can bear at least 10 times the weight of the fixture

When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,

under high working places and other endangered areas is forbidden.

The operator has to make sure that safety-relating and machine-technical installations are approved by an

expert before taking into operation for the first time and after changes before taking into operation another time.

The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled

person once a year.

Allow the fixture to cool for ten minutes before handling.

The projector should be installed outside areas where persons may walk by or be seated.

IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working

load limits, installation material being used, and periodic safety inspection of all installation material and the

projector. If you lack these qualifications, do not attempt the installation yourself, but use a help of professional

companies.

CAUTION: Fixtures may cause severe injuries when crashing down! If you have doubts concerning the safety

of a possible installation, do not install the fixture!

The fixture has to be installed out of the reach of public.

The fixture must never be fixed swinging freely in the room.

Danger of fire !

When installing the device, make sure there is no highly inflammable

material (decoration articles, etc.) in a distance of min. 0.5 m.

CAUTION!

Use 2 appropriate clamps to rig the fixture on the truss.

Follow the instructions mentioned at the bottom of the base.

Make sure that the device is fixed properly! Ensure that the

structure (truss) to which you are attaching the fixtures is secure.

The fixture can be placed directly on the stage floor or rigged in any orientation on a truss without altering its

operation characte ristics .

For securing a fixture to the truss, install two safety wires which can hold at least 10 times the weight of the

fixture. Use only the safety wires with screw-on carabines.

Содержание Robin DL7F



























































Результаты поиска

Содержание Robin DL7F

Отзывы:

Похожие инструкции для Robin DL7F

Бренды по названию

Популярные бренды

Robe Robin DL7F, Руководство пользователя

Результаты поиска

Содержание Robin DL7F

Отзывы:

Похожие инструкции для Robin DL7F

Бренды по названию

Популярные бренды