Robe Robin DL7F Скачать руководство пользователя страница 21

Страница: 21 / 58

Touch any part of the screen or press the [ENTER/Display On] button to display the initial screen with the cur

rent stored DMX address:

Note: The green icon at the top right corner of the screen indicates the level of the display battery charging. If

the whole icon is green, the battery is fully charged while the red icon indicates exhausted battery. The battery

charges during fixture operation, its charging lasts cca 6 hours.

We recommend that the fixture should be in operation at least 7 hours per week to keep the battery fully charged.

If you switch the fixture on and this screen will not appear till 1 minute, switch the fixture off and on again. If the

screen lights, the battery is exhausted. In case the screen still does not light, the battery is faulty.

This is also indicated by an error message "Faulty battery" and if such an error message appears the battery

should be replaced immediately. The lifetime of the battery is highly dependent on ambient temperature (and

consequently on base temperature). If the maximum ambient temperatures (as recorded and displayed in menu:

Information -> Fixture Temperatures -> Ambient Temperature -> Maximum NonRes.) are kept within the spec

ified limits, the battery should last for at least two years. Shell the ambient temperatures exceed the specified

maximum temperature, the lifetime of the batteries could be considerably shortened even up to just one year

or less and also result in physical damage (battery leakage) or unreliable fixture functions.

Damage caused by batteries failed due to exceeded maximum ambient temperature cannot be claimed under

warranty terms.

Touch the green arrow at the bottom right corner of the screen or press the [ENTER/Display On] button to enter

the " Address" menu.

Each item (such as a Tab, menu item, text box, icon) may be selected from a screen by simply touching the

item in the list or by pressing the [NEXT] or [PREV] buttons to scroll through list items. With each press, the

next item is highlighted. Press [ENTER/Display On] to select the highlighted item.

Before first fixture operation, set current date and time in the menu "Date &Time

Setings" (menu path: Personality--> Date &Time Setings).

7.1 Tab " Address"

DMX Address

Select the menu to set the DMX start address

DMX Preset

- Use the menu to select desired channel mode.

DMX Preset

- Use the menu to select desired channel mode.

Mode 1

- 34 control channels

Mode 2

- 29 control channels

Mode 3

- 42 control channels

Mode 4

- 33 control channels

View Selected Preset

- Use the menu to display channels included in the selected mode.

Ethernet Settings

The menu allows all needed settings for the Ethernet operation

Ethernet Mode

Disable

- The option disables Ethernet operation.

Artnet

- Fixture

receives Artnet protocol

gMAI

- Fixture

receives MANet I protocol

gMA2

- Fixture

receives MANet 2 protocol

Содержание Robin DL7F



























































Результаты поиска

Содержание Robin DL7F

Отзывы:

Похожие инструкции для Robin DL7F

Бренды по названию

Популярные бренды

Robe Robin DL7F, Руководство пользователя

Результаты поиска

Содержание Robin DL7F

Отзывы:

Похожие инструкции для Robin DL7F

Бренды по названию

Популярные бренды