Robe Robin 600E Beam, Руководство пользователя

Страница: 23 / 34

3
step by touching the [copy]. By touching the text box "Preview" next to the current program step you
can view created scene.
6. Repeat the steps 4 and 5 for next program steps.
7. After editing desired program steps, adjust the length of the program by touching the text boxes "Start Step"
and "End Step".
Meaning of the icons used in the "Edit Program" menu:
- moves down on the next page - saves adjusted values and leaves menu
- moves up on the previous page - saves values to the current step and copy them to the
following prog. step
- leaves menu without saving values
There is a chart describing behaviour of items "Pan/Tilt Macro" and "P./T. Macro Speed".
DMX
0 -
0 - 3
3 - 63
64 - 5
6 - 7
8 - 5
60 -
- 3
4 - 55
Pan/Tilt Macro
Disabled pan/tilt macro
Reserved
Figure of circle (from small to large)
Figure of horizontal eight (from small to large)
Figure of vertical eight (from small to large)
Figure of rectangle (from small to large)
Figure of triangle (from small to large)
Figure of star (from small to large)
Figure of cross (from small to large)
0
- 7
8 -
30 - 55
Pan/Tilt Macro Speed
No macro generation
Macro generation from fast to slow-forwards
No macro generation
Macro generation from slow to fast-backwards
7.6 Tab "Service"
Adjust DMX Values
- The menu allows you to set all effects to desired positions before fine calibration of the
effects .
Adjust Lamp
- This item opens the light output of the fixture and enables to aim the light beam on the wall to
perform the fine lamp adjustment.
Calibrations
- This menu enables fine calibration of fixture effects and download default calibration values.
Calibrate Effects - The menu allows the fine adjustment of effects. The menu contains list of effects
which can be calibrated:
Pan - a fine pan movement
Tilt - a fine tilt movement
Colour Wheel - a colour wheel
Colour Wheel Fine - a fine movement of the colour wheel
Cyan - cyan flags
Magenta - magenta flags
Yellow
- yellow flags
CTO
- CTO flags
Iris
- an iris module
Zoom
- a zoom module
Dimmer 1
- a dimmer lamella
Dimmer 2
- a dimmer lamella
By using these items you can calibrate and adjust effects to their right positions.
Calibration via the control board
1. Disconnect DMX controller from the fixture and enter the "Calibrate Effects" menu.
2. Use the [up arrow] and [down arrow] to find desired effect and touch it to enter the fine effect adjustment