manualshive.com logo in svg

Robe Robin 600E Beam, Руководство пользователя, Страница: 22 / 34

Поделиться
Скачать
Robe Robin 600E Beam Скачать руководство пользователя страница 22

sion)

Default Settings

 - The menu item allows to set all fixture parameters to the default (factory) values.  

 

7.4 Tab "Manual Control"

Reset Functions

 

- The menu allows to reset the fixture either per function modules  or all modules together.

   Total Reset

 -  The item resets all function modules.

   Pan/Tilt Reset

 -  The item resets a pan and tilt movement.

   Colour System Reset

 - The item resets a colour wheel and CMY/CTO flags.

    Strobe Reset

 - The item resets strobe lamellas.

   Zoom Reset

 - The item resets a zoom module.

Preset Effect Control 

- Use the menu to show preset positions of each channel effect.

Manual Effect control

 -

 

Use the menu to control all fixture channels by means of the control panel.

7.5 Tab "Stand-alone"

 

Test Sequences

 -

Use the menu to run a test/demo sequences without an external controller, which will show 

you some possibilities of using Robin 600E Wash.

   

Dynamic Mode

 - This mode uses all Robin 600E Wash functions including pan/tilt movement and therefore   

is good for a complete introduction of the fixture. 

   

Static Mode

 - This mode is suitable for projections on the wall, ceiling or ground without any pan/tilt move-

ment. Adjust the pan, tilt, zoom, and hot-spot to desired positions an start test sequences by touching the green 

 icon. 

Music  Trigger

  -  Use  the  item  to  activate  the  sound  control  of  the  running  program  via  the  built-in  micro-

phone.

Preset Playback

 - This menu allows you to select the program which will be played in a loop after switching 

the fixture on (the option is commonly used in a stand-alone operation without an external controller).  

   

None

 - The option disables “Presetting playback” function.

   

Test 

- The option starts the  test sequences. 

   

Prog. 1

 - The option starts user program No. .

   Prog. 2

 - The option starts user program No. .

   Prog. 3

 - The option starts user program No. 3.

Play program

 -  Use the menu to run desired program in a loop. 

   Play Program 1 

- The option starts user program No..

   Play Program 2 

- The option starts user program No. .

   Play Program 3 

- The option starts user program No. 3.

Edit Program

 - Use the menu to create or to edit desired program. The Robin 600E Wash offers 3 free pro-

grams, each up to 00 steps.

   Edit Program 1 

- The option allows to edit user program No..

   Edit Program 2 

- The option allows to edit user program No..

   Edit Program 3 

- The option allows to edit user program No.3

To edit program:

1. Touch the item which you want to edit (“Edit Program 1” - “Edit Program 3”). 

. Touch the item "Edit Program Steps".

3. Touch the item "Step ".

4  From the list of effects touch desired effect and set its value. Browse throw the list by touching the [up arrow] 

and [down arrow] and set all desired effects.

An item "Step Time"  (value of 0-25.5 sec.) is the time during which effects last in the current step 

5. Save adjusted effects to the current step by touching the [confirm] or save and copy them to the following  

Содержание Robin 600E Beam



































Отзывы:

Нет отзывов