Robe Divine 60 UV, Руководство пользователя

Страница: 14 / 25

Divine 60 UV
14
If time between two receiving DMX values is < than fade time set in the item“F.tin. “, the adjusted fade time will be
reduced to fill entire time between the two receiving DMX values.
e.g “F.tin.“=2sec. and fixture has received from DMX controller value Red=0 DMX, after 5 seconds will receive
Red=255 DMX. It means, that red will go to full intensity during 2 seconds.
“F.tin. “=8 sec. and fixture has received Red=0 DMX, after 5 seconds will receive Red=255 DMX. It means, that red
will go to full intensity during 5 seconds. (Max, fade time is reduced from 8 sec. to 5 sec.).
DiSP. --- Display adjusting . This function allows you to change the display settings.
d.On --- this function allows you to keep the display on or to turn off automatically 2 minutes
after last pressing any button on the control panel.
d.Int. --- select this function to adjust the display intensity (6-min.,100-max.).
turn ---
select this function to used to rotate menu 180 degrees from current orientation
.
diM.C. --- Dimmer curve
. The menu item allows to select desired dimmer curve:
Lin. --- linear
SqL
--- Square law
tnP.u. --- Temperature unit. Use this menu in order to display the fixture temperatures in desired units: °C or °F.
In.Po. --- Init effect positions. Use this function to set all effects to the desired positions to which they will move
after switching the fixture on (if DMX is not receiving).
dF.SE. --- Default Settings . The menu item sets all fixture parameters to the default (factory) values.
5.4 Manual mode
Use this menu to control all channels via buttons of the control board.
Items in this menu depend on selected DMX mode.
To control fixture channels.
1. Use the UP/DOWN buttons to find “ Man.C“ menu.
2. Press the ENTER button.
3. Use the UP/DOWN buttons to select desired effect (channel).
List of control channels:
“CoL.1” – a zone 1 LEDs saturation
“CoL.2” – a zone 2 LEDs saturation
“CoL.3” – a zone 3 LEDs saturation
“CoL.4” – a zone 4 LEDs saturation
“CoL.5” – a zone 5 LEDs saturation
“CoL.6” – a zone 6 LEDs saturation
“Stro.“ - a strobe/shutter
“dinr“ - a coarse dimmer
“din.F” a fine dimmer
4. Press the ENTER button and use the UP/DOWN buttons to set value , press the ENTER button to confirm it.