20
pressing any button on the control panel. Use the [ ] or [ ] buttons to select "On" if you wish to
keep the display on or "Off" if you wish to turn off automatically 2 minutes after last pressing any
button on the control panel and press [ ] to confirm or [ ] to cancel and return to the menu.
- Blackout during movement correction
The function executes the blackout during the head movement correction (the moving head has lost its right pan/
tilt-position for a short moment). Use the [ ] or [ ] buttons to select "On" if you want to execute the blackout
or "Off" if you don’t and press [ ] to confirm or [ ] to cancel and return to the menu.
- PAN/TILT-feedback
This function allows to return the mowing head to the required pan/tilt position after changing the position by
external force (e.g.by stroke). Use the [ ] or [ ] buttons to select "On" if you wish to enable this function or
"Off" if you wish not to return the mowing head to the required position and press [ ] to confirm or [ ] to cancel
and return to the menu.
Note: If the feedback was switched off ,the pan/tilt-position is changed by an external force and the feedback is
switched on again,the moving head might not to be synchronized with the DMX signal.You have to make a reset
in order to synchronize the moving head with the DMX signal.
- Microphone -sensitivity
With this function you can adjust the microphone sensitivity from 1(maximum) to 20(minimum) . Use the [ ] or
[ ] buttons to select the level of the microphone sensitivity and press [ ] to confirm the chosen level or [
] to cancel and return to the menu.
Example:
underexited
right level
overexited
(upper segment blinks by the bass rhythm)