Roadtrek 210 Chevrolet, Руководство пользователя

Страница: 60 / 84

Waste Water Tank Dumping:
To dump the exterior black waste water tank:
1. Turn the battery disconnect switch to the “ON” position, if not already on, (located on the monitor panel).
2. Remove sewage discharge hose from storage, (see Picture G-P17).
3. Insert the discharge outlet into the waste receptacle.
4. Open the valve on the sewage hose, (see Picture G-P18) (NOTE: valve closed in picture).
5. Open the black water tank valve, (see Picture G-P14).
6. Open the driver’s door, press and hold the macerator pump switch until the tank is empty,
(see Picture G-P16).
To dump the grey waste water tank:
1. Open grey water tank valve.
2. Repeat step 6.
3. Close all valves.
4. Return sewage hose to its storage compartment.
5. Turn battery disconnect to the “OFF” position.
NOTICE: Do not operate the macerator pump "dry". It is recommended to always dump the black water tank
first, then the grey water tank.
NOTE: If macerator should get clogged you will have to push and turn the manual macerator crank "T" handle
to dislodge any debris that might be blocking the macerator, (see picture G-P15).
WATER SYSTEMS
Doc No: 21906532 Rev: 07 Copyright © Roadtrek Motorhomes Inc. 2010 G - 7
Picture G-P15: Macerator
pump located under center
of vehicle.
Picture G-P16: Macerator
pump switch located on
driver’s door post.
Picture G-P17: Sewage
discharge hose storage
located in driver’s side
storage drawer.
Picture G-P18: Sewage
hose discharge valve.
Macerator manual
crank handle