5
Use & Maitenance for Remote Control
Install battery
Slide out the battery seat from the back of remote control, then according to
anode and negative direction to insert the battery.
When use it first. Please pull out film which the battery protrudes.
3V
+
3 V
+
To prize the battery tray with the tip tool.
Pull out the battery tray and insert the b
towards up.
After installed the battery to push back the tray.
CAUTION
Please keep the battery away from the children. If the battery was pushed back
by him. Please see a doctor at once.
CAUTION
Only use a 3V lithium battery.
The remote control does not use in one month at least, please take out the
battery.
Do not electricize to the battery, tears down, heats up or abandons it in the fire.
Do not operate the battery with metal tool.
Do not store the battery with metal material.
If the battery leak liquid, please wipe it off and install the new battery.
Deal with the used battery. To obey the local government laws and regulations
of your country or the environment public organization s rules.
'
Use remote control
The remote control operation aimed the front panel. The remote control can t
work normally to direct the sunlight.
'
CAUTION
Do not keep the remote control to direct the high temperature or sunlight.
Do not keep the remote control falling the floor. So that it was clipped in below of
the brake or gun.
36
Touch Screen Operations
The product can not be adjusted any more after leaving factory
because of all of products were adjusted in production.
*
1
2
3
4
Note: While making the adjustment for the touch screen, point at the
centre of
and do not touch other position. Otherwise,
it will not be effective or incline.
Touch Screen Adjustment
To set this button when touch screen working has warp, in order to setup
accurately, you can choose pointed tools(but do not damage the screen
surface) to operate.Touch
in Pic 9 and four
will be shown
as Pic 9. According to the sequence of the pictures, touch
until
the forth has been touched. Theadjustment has been finished.
1
In audio balance interface,touch
/
to adjust the balance of LF
, RF, LR,RR rangingfrom 0 to 20 .
2
Touch
to quit and back to setup interface.
(Pic 9)
L
Press this button to enter GPS interface.(See details inNavig
ation & map user manual. The GPS function has been built in the model.
Press
MENU
to exit or change
to other modes.
