Installation and Commissioning
................................................................................................................................................................................................
................................................................................................................................................................................................
Manual TRZ 04 · EN04 · February, 1st 2017
11
1.1.7 Transportation
The device is packaged customized according to the transport requirements.
Warning
Risk of injury during transport
Any foot screws must be fitted, if they are used as transit protection against
rolling and tipping.
Take additional care that a rolling and tilting is safely prevented.
To lift the meter only the special lifting eyes / eye bolts may be used.
Pay attention to the maximal loads for the lifting devices (chapter 5
Specifications
) – don’t exceed those.
Make sure that the load is fastened securely before lifting.
Do not stand under lifted loads.
During lifting and/or depositing the device may slip, tip over or fall.
Disregarding the maximum load capacity of the lifting device, the device may
fall down. For any people standing nearby, there is a significant risk of serious
injury.
If the unit is supplied on a Euro pallet, the unit can be transported using a lift
truck or a forklift.
During the transport the meter has to be protected against shock or vibration.
The meter or its additionally mounted spool pieces are equipped with flanges
that are protected with
a sticker foil or blind plugs made of plastic. These must
be removed completely before installation in the pipeline. Remaining rests of
these protections may change the flow pattern and may result in a
measurement error !!
For any transport e.g. for recalibration we ask you to use these protections.
Introduction
