Installation and Commissioning
................................................................................................................................................................................................
................................................................................................................................................................................................
Manual TRZ 04 · EN04 · February, 1st 2017
36
Notice
Attention
Additional equipment or additional measuring instruments can only be
attached or removed under official supervision. Before you connect
additional equipment, make sure that the direction of rotation and the
rotation rate of mechanical transmission coincide. Depending on the
location for attaching additional equipment, you can turn the meter head into
the most favorable position for installation without damaging the locking
seals by loosening two hexagon socket screws.
General
You can turn the meter head through 355° without breaking a seal. It is not necessary to
loosen a locking screw, the meter head is held in position because the rotary mechanism
is stiff. The rotation thus requires a slight effort.
Figure 6: Type “G” meter head
Notice
If work has to be done on the meter head, please make sure that the official
seals are not damaged.
Encoder
