RME Audio Digiface Ravenna, Руководство пользователя

Страница: 8 / 73

8 User's Guide Digiface Ravenna
© RME
5.2 Quick Start
After the driver installation (chapter 6 / 13) the Digiface Ravenna has to be connected to a
RAVENNA network. A RAVENNA network consists of a connection to at least one other
RAVENNA equipped device. The web browser based GUI, RAVENNA Remote, enables config-
uration of the RAVENNA module. Some basic and OS-specific options are available in the Set-
tings dialog of the MADIface series driver.
Level adjustment of the analog output Phones is done in TotalMix FX. The output is optimized for
phones, but can also be used as line output
TotalMix FX remembers all settings, and loads these automatically when the Digiface Ravenna
drivers are loaded.
Stand-alone Operation
The Digiface Ravenna can be used stand-alone, powered by the included power supply. Alterna-
tively USB bus power from a USB power wall wart or USB battery can be used. When not con-
nected to a computer host the device operates as
64 channel MADI to/from RAVENNA con-
verter . All channels are transferred to the other format unchanged, both ways.
To make most use of the additional phones output, a submix of all MADI and RAVENNA input
channels can be set up in computer-connected operation, and stored in the Digiface Ravenna for
stand-alone operation. To store the current
Submix Phones go to Options, Store current State
into Device in TotalMix FX.