RME Audio Digiface Ravenna, Руководство пользователя

Страница: 36 / 73

36 User's Guide Digiface Ravenna
© RME
The lowest field shows the current routing target . A mouse click
opens the routing window to select a routing target. The list shows all
activated routings of the current channel by arrows in front of the
listed entries, the current one is shown in bold letters.
An arrow is only shown with an activated routing. A routing is seen as
activated when audio data is sent. As long as the fader is set to
−∞
the current routing will be shown in bold letters, but not have an arrow
in the front.
Trim Gain. After a click on the T symbol
one channel’s faders are all synchronized. Instead of
changing only a single routing the fader affects all the channel’s active routings. For a better
overview the faders currently not visible are indicated by orange triangles beside the fader path.
When moving the fader the triangles also move to a new position, equalling the fader's new set-
tings.
Note that the fader button is set to the highest routing gain of all routings so that best control is
offered. The gain (fader knob position) of the currently active routing (the submix selected in the
third row) is shown as white triangle.
Background: TotalMix has no fixed channel fader. In case of the Digiface Ravenna there are 65
stereo Aux sends, shown alternately as single fader within the channel strip. The high number of
Aux sends enables multiple and fully independent routings.
In some cases it is necessary to synchronize the gain changes of these routings. An
example is the p
ost fader function, where a change of the singer’s volume shall be
performed identical to the volume change of the signal sent to the reverb device, so
that the reverb level keeps its relation to the original signal. Another example is the
signal of a guitar that is routed to different submixes, means hardware outputs, which
gets much too loud during the solo part, and therefore needs to be reduced in volume
on all outputs simultaneously. After a click on the Trim button this can be done easily
and with a perfect overview.
As all channel’s routings change simultaneously when Trim is active, this mode ba-
sically causes the same behaviour as a trim pot within the input channel, affecting
the signal already before the mixer. That’s how this function got its name.
In View Options / Show the function Trim Gains can be globally switched on and off
for all channels. This global Trim mode is recommended when using TotalMix FX as
live mixing desk.
The Context Menu. With a right click on the input, playback and output channels their context
menus provide advanced functionality (these menus are also available in the Matrix, but only
directly on the channel labels). The entries are self-explanatory and automatically adjust to where
the click is performed. The input channels offer
Clear, Copy input and paste the input mix . On a
playback channel Copy, Paste and Clear the playback mix are available. On an output channel
Copy and Mirror functionality for the current submix is offered.