RME Audio Digiface Ravenna, Руководство пользователя

Страница: 44 / 73

44 User's Guide Digiface Ravenna
© RME
18.6 Preferences
The dialog Preferences can be opened via the
Options menu or directly via F2.
Level Meters

Full scale samples for OVR. Number of
consecutive samples to trigger an over
detection (1 to 10).

Peak Hold Time. Hold time of the peak
value. Adjustable from 0.1 up to 9.9 s.

RMS +3 dB. Shifts the RMS value by +3
dB, so that full scale level is identical for
Peak and RMS at 0 dBFS.
Mixer Views

FX Send follows highest Submix.

FX Send follows Main Out. Not available
for the Digiface Ravenna - no FX.

Center Balance/Pan when changing
Mono/Stereo.
When switching a stereo
channel into two mono channels the pan-
pots are set fully left and right. This option
will set them to center instead.

Disable mouse wheel operation. Pre-
vents unintentional changes when using
the mouse wheel.

Disable double click fader action. Pre-
vents unintentional gain settings, for ex-
ample when using sensitive touchpads.

Store channel open/close in Layout
Preset.
Also loads the state of the chan-
nel panels (Setting/EQ/Dyn).
Dynamic Meters
Not available for the Digiface Ravenna.
Snapshots

Do not load - Main Volume,
Main/Phones Volumes, Control Room
Settings.
The selected values stored in
the Snapshot are not loaded, so the cur-
rent setting is not changed.
Device Handling

Always init DSP devices with TotalMix
FX settings.
For the Digiface Ravenna:
always on, as the unit does not store any.
When connecting to a computer TotalMix
FX will immediately load its settings into
the Digiface.

Count MADI Channels per port. Not available for the Digiface Ravenna.

Disable ASIO Direct Monitoring. Disables ASIO Direct Monitoring (ADM) for the Digiface
Ravenna within TotalMix FX.