RME Audio Digiface Ravenna, Руководство пользователя

Страница: 41 / 73

User's Guide Digiface Ravenna
© RME
41
18.5.2 Snapshots - Groups
Snapshots. Snapshots include all mixer settings, but no graphical elements like window posi-
tions, window size, number of windows, visible settings, scroll states etc. Only the state wide/nar-
row of the channels is registered. Moreover the Snapshot is only temporarily stored. Loading a
Workspace causes the loss of all stored Snapshots, when these all had not been saved before in
a Workspace, or separately via
File / Save Snapshot as . Via File / Load Snapshot the mixer states
can be loaded individually.
Eight different mixes can be stored under individual names in the Snapshot sec-
tion. A click on any of the eight buttons loads the corresponding Snapshot. A
double click on the name field opens the dialog
Input Name to edit the name.
As soon as the mixer state is changed the button starts flashing. A click on Store
lets all buttons flash, whereby the last loaded one, the base of the current state,
flashes inversely. The storage finishes by clicking the desired button (means
storage place). The storage process is exited by another click on the flashing
Store button.
The area Snapshots can be minimized by a click on the arrow in the title bar.
Groups. The area Groups provides 4 storage places each for fader, mute and
solo groups. The groups are valid per Workspace, being active and usable in all
8 Snapshots. But with this they are also lost when loading a new workspace, in
case they have not been saved before in a different Workspace.
Note: The Undo function will help in case of an accidental overwrite or deletion
of the groups.
TotalMix uses flashing signals to guide you through the group setup. After a click on Edit and click
on the desired storage place all desired functions for this group have to be activated or selected.
The storage process is finished by another click on Edit.
When setting up a fader group, make sure to not add faders that are at the most top or lowest
position, except all faders of that group have this position.
The Mute groups operate
– other than the global mute – exclusively for the current routing. This
way you can not mute signals on all outputs unintentionally. Instead signals can be muted on
specific submixes by the push of a button.
A solo group operates exactly like the global solo, signals outside the current routing are not
affected.