RME Audio Digiface AES, Руководство пользователя

Страница: 71 / 104

User's Guide Digiface AES
© RME
71
To maintain overview when the window size has been reduced, the labels are floating. They won't
leave the visible area when scrolling. A right mouse click on the labels brings up the context menu
with the exact same options as in the mixer view: Copy / Mirror / Paste /Clear input channels and
submixes.
25.3 Operation
Using the Matrix is a breeze. It is very easy to indentify the current crosspoint, because the outer
labels light up in orange according to the mouse position.

If input 1 is to be routed to output 1, use the mouse and click one time on crosspoint In 1 / AN
1 with held down Ctrl key. Two green 0.0 dB field pop in, another click removes them.

To change the gain (equals the use of a different fader position, see simultaneous display of
the mixer view), drag the mouse up or down, starting from the gain field. The value within the
field changes accordingly. The corresponding fader in the mixer view is moving simultane-
ously, in case the currently modified routing is visible.

On the right side is the Control Strip from the mixer window, adapted to the Matrix. The button
for the temporary f
ader group is missing as well as all View options, as they don’t make sense
here. Instead the button Mono Mode lets you decide whether all the actions performed in the
Matrix are valid for two channels or just one.
The Matrix not always replaces the mixer view, but it significantly enhances the routing capabilities
and - more important - is a brilliant way to get a fast overview of all active routings. It shows you
in a glance what's going on. And since the Matrix operates monaural, it is very easy to set up
specific routings with specific gains.
26. Tips and Tricks
26.1 ASIO Direct Monitoring (Windows)
Programs that support ADM (ASIO Direct Monitoring - Samplitude, Sequoia, Cubase, Nuendo
etc.) send control commands to TotalMix. This is directly shown by TotalMix. When a fader is
moved in the ASIO host the corresponding fader in TotalMix will move too. TotalMix reflects all
ADM gain and pan changes in real-time.
But: the faders only move when the currently activated routing (the selected submix) corresponds
to the routing in the ASIO host. The Matrix on the other hand will show any change, as it shows
all possible routings in one view.
26.2 Copy a Submix
TotalMix allows you to copy complete submixes to other outputs. In case a complex submix is
need with only a few changes on a different output, the whole submix can be copied to that output.
Right click with the mouse on the original submix output, means Hardware Output. In the context
menu select Copy Submix. Then right click on the new submix output, choose Paste Submix in
the context menu. Now fine tune the submix.
26.3 Doubling the Output Signal (Mirror)
If a mix should be sent out via two (or more) different hardware outputs simply mirror that mix to
any number of other outputs. A right click on the original output brings up the option to
Copy/Mirror
<name> . Another right click on the new output, then selecting Mirror of Output <name> will paste
the whole submix and then synchronize it automatically to any future changes. The outputs now
always send out the same signals, but their main volume (fader) and the EQ and Dynamics set-
tings stay fully independent.