RLS Wacon SYCON 3000 C, Руководство по эксплуатации, Страница: 17 / 37

Changing and calling up the programme data
Selection of the programmable input functions
13
SYCON
3000 C
3. Selection of the programmable input functions
From the 4 available input functions, maximally 2 can be programmed to the
two inputs IN1 and IN2 of the analyser. Each input function can only be used
once. In programme step 3.3, it is determined whether the inputs are active with
open or closed contact.
Parameters – such as a response delay – must still be entered for the selected
inputs in programme steps 4.1- 4.5.
A description of the inputs can be found in the chapter Input functions on page
7.
Input: IN 1
S t e p n o . : 3 . 1
S t a t S t o p R e s t W a t M e
I N P U T 1 = S t a r t A n a l y s i s
▼ ► ▲
Select the desired input function for the input INPUT 1 (IN1) with the help of the
"
►
" key.
Stat = Start analysis
Rest = Reset relay
Stop = Stop analysis WatMe = Water meter
Input: IN 2
S t e p n o . : 3 . 2
S t a t S t o p R e s t W a t M e
I N P U T 2 = S t o p A n a l y s i s
▼ ► ▲
Select in accordance with programme step 3.1 the desired input function for the
input INPUT 2 (IN2) with the help of the "
►
" key.
Activation of the input functions
S t e p n o . : 3 . 3
S
T A R T | S T O P |
▲
▼ ►
#
Select the way the inputs are activated for the inputs selected in the programme
steps above.
Press the "
►
" key to select the input functions programmed for the inputs IN1
and IN2 and the "#" key to choose between "|" or "-".
"|" Activation of the selected input function when the contact is closed (NO con-
tact)
"-" Activation of the selected input function when the contact is open (NC con-
tact)
4.1
3.3
Stat Stop Rest WatMe
Input IN 2
3.2
Activation
Stat Stop Rest WatMe
Input IN 1
2.3
3.1