RKIN AlcaPure, Руководство пользователя, Страница: 9 / 28

OPERATION
/ 9
OPERATION CONDITIONS
• Do not use water above 113°F (45 °C)
• The ambient temperature must be between 40
and 104 °F (4 and 40 °C. )
• Keep the system from extreme temperatures,
like cooking surfaces, direct sunlight, and
extreme environmental conditions.
• Avoid external dripping on the purifier.
CAUTIONS
Do not use with water that is microbiologically unsafe, of unknown quality, or
without adequate disinfection before or after the system. If the water being
filtered is from a public water supply, it will comply with requirements and your
RKIN Zero Installation Purifier will substantially improve the water quality.
In the event that the water to be filtered is not from a public water supply,
or is of unknown origin, in order to ensure proper purification, contact your
distributor to advise you on the most appropriate physical, chemical and
bacteriological water treatment to use with your RKIN system.
• Unplug the unit before repair, inspection or filter replacement.
EFFECT OF TDS CONCENTRATION
IN THE INLET WATER
Production rate will vary depending on the TDS content (Total Dissolved Solids)
and temperature of water to be filtered. Water with a lower temperature and
higher TDS will be filtered slower than water which is warmer or of a lower TDS.
• It is recommended to use water with a maximum hardness of 25 grains in
order to obtain optimum performance.
• If the inlet water is of hardness greater than 25 grains, or contains high
concentrations of iron or manganese, or hyper chlorination, there may be a
reduction in membrane life and performance of certain components of the purifier.
RKIN Zero Installation Purifier is designed for TDS up to 800 ppm. For TDS
above 800 ppm, consult your dealer. (If the water being filtered is from a public
water supply, it will comply with requirements for water to be used for the RKIN
purifier.)