RKIN AlcaPure, Руководство пользователя, Страница: 13 / 28

FILTER INITIALIZATION
When the purifier is being used for the first time, the filters should be rinsed by
running the purifier for two cycles, and discarding the water. Water from the
first cycle may contain fine carbon sediment from the post filter which may give
the water a slight gray color. This carbon is food grade and healthy, and will not
affect the quality of the water. After filtering two cycles, the pure water reservoir
may be removed from the purifier and rinsed with tap water. (See page 15)
With filters rinsed, the purifier may now be used for pure water filtration.
When filters in the unit are brand new, it takes some water to fill any empty
space within the system.
The top tank will have less filtered water than usual during initial cycle, and
purifier might sound a bit louder as air is being pushed out from the system.
FILTERING CYCLE TIME
/ 13
FILTERING CYCLE TImE
Filtration completed within 20
minutes or less.
Filtration incomplete after 20 minutes
preset cycle.
Normal condition Filters should be changed
The time required to complete one cycle will vary according to water quality,
water temperature and how long the filters have been used. The filtering
process will turn off automatically once the cycle is completed.
Gradually as the filters and membrane become used, the filtering cycle time will
become longer. Usually the filtering process will complete before reaching a
preset 20 minute time limit. If the water level in the bottom tank doesn’t
come close to the minimum ”0” level in one 20 minute cycle, this indicates that
the filters should be changed.
PUSH PUSH