RKIN AlcaPure, Руководство пользователя, Страница: 14 / 28

WATER SUPPLY
14 \
CHANGING WATER IN SuppLY pITCHER.
After completing a filtration cycle, completely empty the supply pitcher, and
refill with fresh water before starting another cycle. The water remaining in the
supply pitcher after a filtration cycle has a higher concentration of TDS, so
starting a new cycle, by adding fresh water to this remaining concentrate water
will lower system performance and can damage the RO membrane and filters.
5.
Do not
add
Notice:
• Water should not be stored in the purifier for extended periods of time
exceeding one week.
• If you plan to not use the purifier for more than one week, completely empty
the water supply pitcher and pure water reservoir, and disconnect the power
supply. When you return, filter two cycles of water to rinse the system.
• If the purifier has not been used for more than a month, remove and wash
with soap and water both the supply pitcher and pure water reservoir. Rinse
the reservoirs and filter two cycles of water to rinse the system.