RKIN AlcaPure, Руководство пользователя, Страница: 22 / 28

RESET PROCEDURE
22 \
FOR FILTER REPLACEMENT INDICATOR LIGHT
At two years the RO membrane and filters can all be replaced at the same time.
※
For your easy reference, a copy of these instructions has been placed inside the system.
FILTER CHANGE INDICATOR LIGHT
RO mEmBRANE REpLACEmENT
The system has been set to indicate filter changes
at one year and RO membrane change at two
years. Follow the instructions below to reset the
RED indicator light after filters changes.
FLASHING
RED light STEADY RED
light
At one year the LED indicator light will “FLASH” RED to remind for FILTER
change. Follow the instructions in the user manual on page 16-18 to replace
the two pre-filters and post filter. To reset the “FLASHING” RED LIGHT, press
in and HOLD the LED indicator switch for FIVE seconds. When you hear two
“beeps” it indicates that the system has been reset. The LED light will flash red
again after one year.
At two years, the LED light will illuminate a STEADY RED light to indicate RO
MEMBRANE change time. Follow the instructions in the user manual, (pages
20-21) for changing RO membrane. After changing the membrane, to RESET
the LED light, unplug the power cord from the back of the purifier. Push in the
LED
control panel button. While holding the LED button depressed, plug the
power cord back into the purifier. Release the LED button and you will hear
two short “beeps” indicating the system has been reset. (After two years the
indicator light will illuminate RED again to remind for next membrane change.)