3. MOUNTING
IMSRM52-E4
19
Mounting on the DIN rail
1.
Remove the module from the mother block. For details of removing the module, see
3.5
Removing the Module (P.21)
.
2.
Pull down both locking devices at the bottom of the mother block.
(Figure 1)
3.
Attach the top bracket of the mother block to the DIN rail and push the lower section into place
on the DIN rail. (Figure 2)
4.
Slide the locking devices up to secure the mother block to the DIN rail. (Figure 3)
5.
Slide connectors together to complete mother block installation. (Figure 4)
Figure 1
Locking device
Figure 2
Figure 3
Figure 4
When the mother block is mounted on panel, 50 mm or more space is required at the
top and bottom of the mother block to attach the module mainframe.
